Collector - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Collector

TABLE 54
Field
FABRIC_ID *
CHECKSUM_KEY *
CHECKSUM
TABLE 55
Field
FABRIC_ID *
COLLECTOR_NAME *
SEED_SWITCH_IP
LAST_SEED_SW_
MODIFICATION
TABLE 56
Field
NAME *
CLASS_NAME
DESCRIPTION
TABLE 57
Field
ID *
SAN_ID
SEED_SWITCH_WWN
NAME
CONTACT
LOCATION
DESCRIPTION
TYPE
SECURE
DCFM Enterprise User Manual
53-1001775-01
FABRIC_CHECKSUM
Definition
Fabric ID, foreign key to the FABRIC table.
Type of checksum, e.g. device data or zone data.
Actual checksum value.
FABRIC_COLLECTION
Definition
Fabric ID, foreign key to the FABRIC table.
Name of the collector, e.g., NameServerInfoCollector,
TopologyCollector, ZoneInfoCollector,
ActiveZoneInfoCollector.
IP address of the switch which serves as the seed
switch. This is the switch from which above mentioned
fabric level collectors get their information.
Timestamp of the seed switch, when the particular
HTML page was changed last. Note that this is not
when the last time collection was done.
COLLECTOR
Definition
Name of the collector registered with the collection
framework.
Java class name which serves as the collector.
Collector description, usually not used.
FABRIC
Definition
Foreign key to SAN table; usually 1 since there is only
one SAN.
WWN of the virtual switch used as seed switch to
discover the fabric.
User-assigned fabric name.
User-assigned "contact" for the fabric.
User-assigned "location" for the fabric.
User-assigned fabric description.
Type of fabric (0:legacy fabric, 1: base fabric, 2: logical
fabric).
1 = it is a secured fabric.
D
Collector
Format Size
int
varchar 32
varchar 16
Format Size
int
varchar 256
varchar 128
timestamp
Format Size
varchar 256
varchar 256
varchar 512
Format Size
int
int
char 23
varchar 256
varchar 256
varchar 256
varchar 256
smallint
smallint
725