Saving A Pdcm Configuration To Another Device - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Saving a PDCM configuration to another device

NOTE
If you receive a 'FICON not supported on switch' error, refer to FICON troubleshooting for a list of
possible causes.
To save an existing PDCM configuration to another device, complete the following steps.
1. Select Configure > Allow/Prohibit Matrix.
2. Select the PDCM configuration you want to copy.
3. Click Save As.
4. Enter a name for the configuration.
5. Enter a description for the configuration.
6. Select the check box for the device to which you want to save the configuration in the Select
7.
DCFM Enterprise User Manual
53-1001775-01
The Configure Allow/Prohibit Matrix dialog box displays.
You can do this by expanding the view for the switch under Available Switches and selecting a
configuration, or you may select the matrix under PDCM Matrix.
The Save As/Copy dialog box displays.
FIGURE 201
Save As/Copy dialog box
Switch table.
Click OK.
A message displays stating that the outstanding port configuration is discarded when copying
a configuration from the switch with more ports to a switch with fewer ports and vice versa.
Click OK to close the message.
The saved configuration displays in the Available Switches table under the selected switch. To
edit this configuration, refer to
"Configuring an Allow/Prohibit manually"
Saving a PDCM configuration to another device
"Configuring a PDCM Allow/Prohibit Matrix"
on page 470.
18
on page 468 or
473