Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 529

3. Select the FC router from the Available Routers table.
4. Click the right arrow to move the FC router you selected to the Selected Router table.
5. Select a valid fabric ID (1–128) from the Fabric ID list.
6. Click OK on the Router Configuration-Connect Edge Fabric dialog box.
7.
8. Repeat
9. Configure LSAN zones in each fabric that will share devices.
DCFM Enterprise User Manual
53-1001775-01
You can choose any unique fabric ID as long as it is consistent for all EX_Ports that connect to
the same edge fabric. If the edge fabric is already configured with the backbone fabric, the
Fabric ID list is disabled and populated with the pre-selected value.
The Element Manager launches automatically and opens the FC Router dialog box and Port
Configuration wizard. For more information, refer to the Web Tools Administrator's Guide.
Follow the instructions in the Port Configuration wizard to configure the EX_Port:
a. Select the port to be configured as an EX_Port.
b. Ensure the backbone fabric ID of the switch is the same as that of other FC routers in the
backbone fabric. The backbone fabric ID is the fabric ID that was selected in the Router
Configuration-Connect Edge Fabric dialog box.
c. Complete the wizard to configure the EX_Port.
d. Physically connect the EX_Port to the edge fabric, if it is not already connected.
step 1 through step 7
configuration involves two edge fabrics.
For specific instructions, refer to
Connecting edge fabrics to a backbone fabric
to connect a second edge fabric to the FC router, if your
"Configuring LSAN zoning" on page 628.
19
491