Removing A Resource Group - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

14

Removing a resource group

5. Remove fabrics from the resource group by completing the following steps.
6. Add hosts to the resource group by completing the following steps.
7.
8. Click OK to save the resource group and close the Add/Edit Resource Group dialog box.
9. Click OK on the message.
10. Click OK to close the Server Users dialog box.
Removing a resource group
To remove a resource group, complete the following steps.
1. Select Server > Users.
2. Select the resource group you want to remove in the Resource Groups table.
3. Click Remove.
360
a. Click the Fabrics tab.
a. In the Selected Fabrics and Hosts table, select the fabrics you want to remove from this
group.
b. Click the left arrow button.
The selected fabrics are moved to the Available Fabrics table.
a. Click the Hosts tab.
a. In the Available Hosts table, select the hosts you want to include in this group.
b. Click the right arrow button.
The selected hosts are moved to the Selected Fabrics and Hosts table.
Remove hosts from the resource group by completing the following steps.
a. Click the Hosts tab.
b. In the Selected Fabrics and Hosts table, select the hosts you want to remove from this
group.
c. Click the left arrow button.
The selected hosts are moved to the Available Hosts table.
A message box displays indicating the group was updated successfully.
To add users to this group, follow the instructions in
page 361.
The Server Users dialog box displays.
A message box displays asking you to confirm the removal.
"Assigning a user to a resource group"
DCFM Enterprise User Manual
on
53-1001775-01