Deleting A Pdcm Configuration; Changing The Pdcm Matrix Display - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Deleting a PDCM configuration

NOTE
If you receive a 'FICON not supported on switch' error, refer to FICON troubleshooting for a list of
possible causes.
You cannot delete the active configuration, the IPL configuration, or a configuration that is marked
as having uncommitted changes.
1. Select Configure > Allow/Prohibit Matrix.
2. Select the PDCM configuration you want to delete. You can do this by expanding the view for
3. Click Delete.
4. Click Yes to confirm.

Changing the PDCM matrix display

NOTE
If you receive a 'FICON not supported on switch' error, refer to FICON troubleshooting for a list of
possible causes.
There are three options for the PDCM Matrix display on the Configure Allow/Prohibit Matrix dialog
box:
•
•
•
Perform the following steps to change the display to the desired format.
1. Select Configure > Allow/Prohibit Matrix.
2. Select Cascade, Tile Horizontally, or Tile Vertically from the Window Arrangement list.
DCFM Enterprise User Manual
53-1001775-01
The Configure Allow/Prohibit Matrix dialog box displays.
the switch under Available Switches and selecting a configuration, or you may select the matrix
under PDCM Matrix.
A confirmation message displays.
The matrix definitions may be cascaded (this is the default view).
The matrix definitions may be tiled horizontally.
The matrix definitions may be tiled vertically.
The Configure Allow/Prohibit Matrix dialog box displays.
Deleting a PDCM configuration
18
475