Entering The Server Ip Address Of A Tool; Adding An Option To The Tools Menu - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Entering the server IP address of a tool

If the third-party tool is a web-based application, you must enter the IP address of the applications
server as a parameter to be able to open the application.
To enter the server IP address, complete the following steps.
1. Select Tools > Setup.
2. Click the Tools Menu tab.
3. Select the tool you want to edit in the Tool Menu Items table.
4. Edit the IP address of the server (for example,
5. Click Edit.
6. Click OK to save your work and close the Setup Tools dialog box.

Adding an option to the Tools menu

You can add third-party tools to the Tools menu which enables you to launch tools directly from the
application.
To add a option to the tools menu, complete the following steps.
1. Select Tools > Setup.
2. Click the Tools Menu tab.
DCFM Enterprise User Manual
53-1001775-01
The Setup Tools dialog box displays.
The Tool Menu Items table displays all configured tools, including the tool name as it displays
on the Tools menu, parameters, and keystroke shortcuts.
The settings for the selected tool display in the fields at the top of the dialog box.
IP_Address Port_Number) in the Parameters field.
http:// :
NOTE
You must click Edit before clicking OK; otherwise, your changes will be lost.
The Setup Tools dialog box displays.
The Tool Menu Items table displays all configured tools, including the tool name as it displays
on the Tools menu, parameters, and keystroke shortcuts
Entering the server IP address of a tool
IP_Address or
http://
(Figure 65).
6
147