Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 754

C
About User Privileges
TABLE 35
Privileges and Application Behavior (Continued)
Privilege Description
Zoning Online Allows you to edit any of
the fabric zone databases
NOTE
in the available fabrics
You must also have the
within the Zoning dialog
Zoning Activation privilege
box from the client side
to enable the Activate
and then save to the
button.
switch.
NOTE
You must also have the
Zoning g Offline privilege
to enable the Save As
function in the in the
Zoning and
Compare/Merge dialog
boxes.
Zone Set Edit Limits Allows you to set the
number of zoning edit
operations that can be
performed on a fabric
zone database before
activating a zone
configuration.
716
No Privilege Read-Only
In Zoning dialog box, the In Zoning dialog box, the
Zone DB list includes Zone DB list includes
online and offline zones; online and offline zones.
however, if an online zone If you select an online
is selected, the contents zone, the contents are
are not loaded into the loaded into the Zoning
Zoning dialog box. To dialog box. To launch
launch offline zones you offline zones you must
must have the Zoning have the Zoning Offline
Offline privilege. privilege.
Disables all zone Disables all online zone
database editing and database editing,
switch pushing functions. activation, and persisting
functions.
In Zoning dialog box,
enables the Cancel and
Help buttons and the
Compare and Export
functions in the Zone DB
Operation list.
On the Zone DB tab,
enables the find buttons.
On the Active Zone Config
tab, enables the Zone
Member Display list and
Report button.
In the Compare/Merge
dialog box, enables the
Cancel and Help buttons.
In the Potential Members
table, enables all
functions in the right-click
menu.
In the Zones table,
enables the Port Label,
Search, and Properties
(not editable) functions in
the right-click menu.
In the Zone Configs table,
enables the Properties
(not editable) function in
the right-click menu.
Disables the Zoning > Set Enables the Zoning > Set
Edit Limits command Edit Limits command
from the Configure menu. from the Configure menu.
Disables all commands
and functions on the
dialog box except the
Close and Help.
Read/Write
Enables all functions on
the Zoning dialog box.
Enables the Zoning > Set
Edit Limits command
from the Configure menu.
Enables all commands
and functions on the
dialog box.
DCFM Enterprise User Manual
53-1001775-01