Host Discovery; Connectivity Map - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Host discovery

The Management application enables you to discover individual hosts, import a group of hosts from
a CSV file, or import host names from discovered fabrics. The maximum number of host discovery
requests that can be accepted is 1000. Host discovery requires HCM Agent 2.0 or later. SMI and
WMI discovery are not supported.
NOTE
Pure Fabric discovery alone shows adapters behind Access Gateway and all adapter ports as virtual.
When you discover an adapter and ports using Host discovery, the adapter and all its ports are
shown as physical.
Instructions for discovering hosts are detailed in
about the following:

Connectivity map

The Connectivity Map, which displays in the upper right area of the main widow, is a grouped map
that shows physical and logical connectivity of SAN components, including discovered and
monitored devices and connections. These components display as icons in the Connectivity Map.
For a list of icons that display in the Connectivity Map, refer to the following tables in
"Getting
•
•
•
The Management application displays all discovered fabrics in the Connectivity Map by default. To
display a discovered Host in the Connectivity Map, you must select the Host in the Product List. You
can only view one Host and physical and logical connections at a time.
DCFM Enterprise User Manual
53-1001775-01
•
"Discovering Hosts by IP address or hostname"
•
"Importing Hosts from a CSV file"
•
"Importing Hosts from a Fabric"
•
"Configuring Brocade HBA credentials"
•
"Configuring virtual machine credentials"
•
"Editing Host credentials"
•
"Removing a Host from Discovery"
•
"Viewing the discovery state"
•
"Troubleshooting discovery"
Started":
"Product icons" on page 11
"Group icons" on page 12
"Port icons" on page 12
Chapter 2, "Discovery"
on page 42
on page 43
on page 44
on page 45
on page 46
on page 47
on page 48
on page 48
on page 49
15
Host discovery
and include information
Chapter 1,
367