Assigning A Device To The Call Home Center; Removing A Device From A Call Home Center - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual
Supporting dcfm 10.4.x
Hide thumbs
Also See for Brocade BladeSystem 4/24:
- User manual (830 pages) ,
- Command reference manual (894 pages) ,
- Documentation update (271 pages)
Table of Contents
Advertisement
4
Assigning a device to the call home center
Assigning a device to the call home center
Discovered devices (switches, routers, and directors) are not assigned to a corresponding call
home center automatically. You must manually assign each device to a call home center before you
use call home.
To assign a device or multiple devices to a call home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Select the devices you want to assign to a call home center in the Products List table.
3. Select the call home center to which you want to assign the devices in the Call Home Center
4. Click the right arrow button.
5. Click OK to close the Call Home dialog box.
Removing a device from a call home center
To remove a device or multiple devices from a call home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Select the call home center from which you want to remove devices in the Call Home Center
3. Select the devices you want to remove from the selected call home center.
4. Click the left arrow button.
5. Click OK.
6. Click OK to close the Call Home dialog box.
118
The Call Home dialog box displays.
table.
You can only assign a device to one call home center at a time.
If you do not select a call home center, the selection defaults to the first call home center in the
Call Home Center table.
If you have made a previous selection on an assigned device or filter and you do not select a
call home center, the selection defaults to the previous selection's call home center.
The selected devices display beneath the selected call home center. Devices assigned to a call
home center do not display in the Products List table.
The Call Home dialog box displays.
table.
A confirmation message displays.
The selected devices are removed from the call home center and display in the Products List
table.
DCFM Enterprise User Manual
53-1001775-01
Advertisement
Chapters
Table of Contents
Troubleshooting
