Zoning Administration; Comparing Zone Databases - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

22

Zoning administration

4. Right-click the traffic isolation zone you want to disable failover on in the Zones list and clear
5. Click OK or Apply to save your changes.
Zoning administration
This section provides instructions for performing administrative functions with zoning. You can
rename, duplicate, delete, and perform other tasks on zone members, zones, and zone
configurations.

Comparing zone databases

You can compare zone databases against one another to identify any and all differences between
their membership prior to sending them to the switch. Once the two databases have been
compared, icons display to show the differences between the two databases. These icons are
illustrated and described in
TABLE 31
Icon
To compare two zone databases, complete the following steps.
1. Select Configure > Zoning > Fabric.
2. Select Compare from the Zone DB Operation list.
638
the Configured Failover check box.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
Table
Compare icon indicators
Description
Added—Displays when an element is added to the editable database.
Modified—Displays when an element is modified on the editable database.
Removed—Displays when an element is removed from the editable database.
The Zoning dialog box displays.
The Compare/Merge Zone DBs dialog box displays, as shown in
31.
Figure 267.
DCFM Enterprise User Manual
53-1001775-01