Brocade Communications Systems Brocade 8/12c Command Reference Manual page 55

ag --printalpamap F_Port
ag --deletepwwnfromdb PWWN
ag --clearalpamap F_Port
ag --addwwnmapping N_Port "WWN [;WWN2;...]" | --all
ag --delwwnmapping N_Port "WWN [;WWN2;...]" | --all
ag --addwwnpgmapping Port_Group "WWN [;WWN2;...]" | --all
ag --delwwnpgmapping Port_Group "WWN [;WWN2;...]" | --all
ag --addwwnfailovermapping N_Port "WWN [;WWN2;...]" | --all
ag --delwwnfailovermapping N_Port "WWN [;WWN2;...]" | --all
ag --wwnmappingenable "WWN [;WWN2;...]" | --all
ag --wwnmappingdisable "WWN [;WWN2;...]" | --all
ag --wwnmapshow
ag --reliabilitycounterset
ag --reliabilitycountershow
DESCRIPTION
Use this command to perform the following Access Gateway management functions:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Fabric OS Command Reference
53-1001764-01
Enable or disable Access Gateway mode.
Display current configuration and state of AG.
Configure and display F_Port to N_Port mapping.
Configure and display N_Port failover and failback policies.
Configure and display Port Group policy.
Create or remove a Port group.
Enable or disable auto port configuration (APC) modes for a Port group.
Get or set timeout value for fabric name monitoring.
Display Port Groups and member N_Ports.
Add or delete N_Ports in a Port group.
Display all policies and their status.
Enable or disable auto port configuration (APC) policy.
Enable or disable preferred secondary N_Port policy.
Enable, disable, and manage advanced device security (ADS) policy.
Manage persistent ALPA mode.
Manage device WWN to N_Port mappings.
Manage device WWN to N_Port group mappings.
Manage device WWN failover to N_Ports configured as preferred failover ports.
Enable or disable device WWN mappings.
Configure the reliability limit for the preferred N_Port.
22
ag
21