xStack
Appendix C System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in the System Log of
this Switch.
Category
Log Description
Event description: System started up
System
Log Message: System started up
Event description: Configuration saved to flash
Log Message: Configuration saved to flash (Username: <username>)
Parameters description:
username: The user name that save the configuration.
Event description: System log saved to flash
Log Message: System log saved to flash(Username: <username>)
Parameters description:
username: The user name that save the configuration.
Event description: Configuration and log saved to flash
Log Message: Configuration and log saved to flash (Username: <username>)
Parameters description:
username: The user name that save the configuration.
Event description: Temperature sensor enters alarm state.
Peripherals
Log Message: Temperature sensor <sensorID> enters alarm state (current
temperature: <temperature>)
Parameters description:
sensorID: The sensor ID.
temperature: The temperature.
Event description: Temperature recovers to normal.
Log Message: Temperature sensor <sensorID> recovers to normal state
(current temperature: <temperature>)
Parameters description:
sensorID: The sensor ID.
temperature: The temperature.
Event description: Internal Power failed.
Log Message: Internal Power failed
Event description: Internal Power is recovered.
Log Message: Internal Power is recovered
Event description: Redundant Power failed.
Log Message: Redundant Power failed
Event description: Redundant Power is working.
Log Message: Redundant Power is working
Event description: SNMP request received with invalid community string
SNMP
Log Message: SNMP request received from <ipAddress> with invalid
community string!
Parameters description:
ipAddress: IP address.
Event description: Port link up
Interface
Log Message: Port <portNum> link up, <link state>
Parameters description:
portNum: The port number
link state: port link status, for example: 100Mbps FULL duplex
Event description: Port link down
Log Message: Port <portNum> link down
Parameters description:
portNum: The port number.
Event description: System fatal error
Debug
Log Message: System re-start reason: system fatal error
Event description: CPU exception
Log Message: System re-start reason: CPU exception
Event description: DDM exceeded or recover from DDM alarm threshold
DDM
Log Message: Port <portNum> SFP [thresholdType] [exceedType] the
[thresholdSubType] alarm threshold
Parameters description:
portNum: The port number.
thresholdType: the DDM threshold type. The value should be one of the
following values: temperature, supply voltage, bias current, TX power, RX
power.
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Severity
Critical
Informational
Informational
Informational
Informational
Informational
Critical
Critical
Critical
Critical
Informational
Informational
Informational
Emergency
Emergency
Critical
444
Note