Vlan Commands; Create Vlan - D-Link DGS-1100-16/ME Reference Manual

The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command

create vlan

delete vlan
config vlan
show vlan
enable asymmetric_
vlan
disable
asymmetric_vlan
show asymmetric_vlan
enable
management_vlan
disable
management_vlan
config
management_vlan
show
management_vlan
config port_vlan
show port_vlan
enable pvid
auto_assign
disable pvid
auto_assign
show pvid auto_assign
Each command is listed in detail, as follows:
create vlan
Purpose
Syntax
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
[name <vlan_name 8> tag<vlanid 2-4094> | vlanid <vidlist 2-4094>]
[name <vlan_name 8> | vlanid <vidlist 2-4094>]
[name <vlan_name 8> [add [tagged | untagged] | delete ] <portlist> | vlanid
<vidlist 1-4094>] [[add [tagged | untagged] | delete ] <portlist> | name
<vlan_name 8>]]
{name <vlan_name 8> | vlanid <vidlist 1-4094> | ports <portlist>}
vlanid <vlanid 1-4094>
<portlist> pvid <vlanid 1-4094>
{port <portlist>}
To create a VLAN on the Switch.
create vlan [name <vlan_name 8> tag<vlanid 2-4094> | vlanid
<vidlist 2-4094>]

VLAN COMMANDS

78
16