Config Ssh Server - D-Link DGS-3100 SERIES Cli Manual

Example usage:
To view the cuurent authentication mode set on the Switch:
DGS3100# show ssh authmode
The SSH User Authentication Support
--------------------------------------------------------------------------
Publickey
DGS3100#

config ssh server

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the SSH server:
DGS3100# config ssh server timeout 300 port 1000
Success.
DGS3100#
show ssh server
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SSH server:
DGS3100# show ssh server
SSH Server Status
SSH Max Session
Connection timeout
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
: Enabled
To configure the SSH server.
config ssh server { timeout <sec 120-600> | port
<tcp_port_number 1-65535> }
The config ssh server command configures the SSH server.
timeout <sec 120-600> - Specifies the connection timeout. The
value may be between 120 and 600 seconds. The default is 600
seconds.
port <tcp_port_number 1-65535> - The TCP port number of the
server. TCP ports are numbered between 1 and 65535. The 'well-
known' port for the SSH management software is 22.
Only administrator or operator-level users can issue this command.
To display the SSH server setting
show ssh server
The show ssh server command displays the current SSH server
settings.
None
None
: disabled
: 5
: 600
138