Table of Contents
Advertisement
Syntax
clear counters [ethernet interface | port-channel port-channel-number]
Interface — Valid Ethernet port.
port-channel-number — Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, the counters for interface g1 are cleared.
console# clear counters ethernet g1
5.7.13 set interface active
The set interface active privileged EXEC mode command reactivates an interface that was suspended
by the system.
Syntax
set interface active {ethernet interface | port-channel port-channel-number}
interface — Valid Ethernet port.
port-channel-number — Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example activates interface e5, which is disabled.
Advertisement
Table of Contents
