Table of Contents
Advertisement
4.7.6 Multiple Hosts
The Multiple Hosts screen (see figure 4-33) allows network managers to configure advanced port-based
authentication settings for specific ports and VLANs.
The Page contains the following fields:
• Port
• Enable Multiple
Hosts
• Action on Violation
• Enable Traps
• Trap Frequency
Figure 4-33 M
ultiple Hosts screen
Displays the port number for which advanced port-based
authentication is enabled.
When checked, indicates that multiple hosts are enabled. Multiple
hosts must be enabled in order to either disable the ingress-filter, or to
use port-lock security on the selected port.
This defines the action to be applied to packets arriving in single-host
mode, from a host whose MAC address is not the supplicant MAC
address. The possible field values are:
• Discard, which discards the packets. This is
• For
ward, by which forwards the packet.
• Discard Disable, discards the
The ports remains shut down until reactivated, or until the device
is reset.
When checked, indicates that traps
Defines the time period by which traps are sent to the host. The Trap
the default value.
packets and shuts down the port.
are enabled for Multiple Hosts
Advertisement
Table of Contents
