Server Logs - Planet WGSD-1022 User Manual

4.12.11 Server Logs

The Global Log Parameters page contains fields for enabling logs globally, and fields for defining log
parameters. The Severity log message
Event messages have a unique format, as per the SYSLOG RFC recommended message format for all
error reporting. For example, Syslog+ local device reporting. Messages are assigned a severity code,
and include a message mnem
Messages are filtered based
set of event logging devices to which are sent for each event logging device. The following table contains
the Log Severity Levels:
Severity Type
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug
T he Se rver Logs s creen (see figure 4-80) co
Log Servers. New log servers can be defined, and the log severity sent to each server.
s are listed from the highest severity to the lowest.
onic, which identifies the source application generating the message.
on their urgency or relevancy. The severity of each message determines the
Severity Description
Level
0 The system is not functioning.
1 The system needs immediate
attention.
2 The system is in a critical state.
3 A system error has occurred.
4 A system warning has occurred.
5 The system is functioning properly,
but system notice has occurred.
6 Provides device information.
7 Provides detailed information about
the l og. If a Debug error occurs,
cont act Dell Online Technical Support
ntains information for viewing and configuring the Remote
Example
Memories overflow.
Main system memory
pool overflow.
Cannot bind to SNMP.
Failed to delete entry.
Port down.
Bad route.
Link up.
Method list created.