Ssh And Slogin Commands; Ip Ssh Port - Planet WGSD-1022 User Manual

Type: point-to-point (configured: auto)
Port Fast: no (configured: no)
Number of transitions to forwarding state: 1
BPDU: sent 2, received 120638

5.22 SSH and SLOGIN Commands

5.22.1 ip ssh port

The ip ssh port global configuration command specifies the port to be used by the SSH server. To use
the default port, use the no form of this command.
Syntax
ip ssh port port-number
no ip ssh port
port-number — Port number for use by the SSH server (Range: 1 - 65535).
Default Configuration
The default value is 22.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the port to be used by the SSH server as 8080.
Console (config)# ip ssh port 8080