Sntp Anycast Client Enable; Sntp Client Enable (Interface) - Planet WGSD-1022 User Manual

5.5.10 sntp anycast client enable

The sntp anycast client enable global configuration command enables anycast client. To disable the
polling for SNTP broadcast client, use the no form of th
Syntax
sntp anycast client enable
no sntp anycast clien t enable
Thi s c mmand has no arguments or keywords. o
Default Configuration
Disable d
Co mmand Mode
Global configuration
User Guideli nes
Polling time is determined by the sntp client poll timer global configuration command.
Use the sntp client enable interface config
Examples
The following example enab
Console (config-if)# sntp anycast client enable
5.5.11 sntp client enable (interface)
The sntp client enable interface configuration command enables
(SNTP) client on an interfac
Syntax
sntp client enable
n o sntp client enable
This command has no arguments or keywords.
D efault Configuration
Disabled
Command Mode
Interface configuration (Ethernet, Port-Channel, VLAN) m
uration command to enable sntp client on specific interface.
les anycast clients.
e. To disable the SNTP client, use the no form of this command.
is command.
the Simple Network Time Protocol
ode