Table of Contents
Advertisement
5.29.2 dot1x system-auth-control
The dot1x system-auto-control command enables 802.1x globally. Use the no form of this command to
disable 802.1x globally.
dot1x system-auto-control
no dot1x system-auto-control
Syntax
This command has no arguments or keywords.
Default Configuration
Disabled
Command Modes
Global configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables 802.1x globally.
Console (config)# dot1x system-auto-control
5.29.3 dot1x port-control
The dot1x port-control interface configuration command enables manual control of the authorization
state of the port. Use the no form of this command to return to the default setting.
Syntax
dot1x port-control {auto | force-authorized | force-unauthorized}
no dot1x port-control
auto — Enable 802.1X authentication on the interface and cause the port to transition to the
authorized or unauthorized state based on the 802.1X authentication exchange between the
switch and the client.
force-authorized — Disable 802.1X authentication on the interface and cause the port to
transition to the authorized state without any authentication exchange required. The port resends
and receives normal traffic without 802.1X-based authentication of the client.
Advertisement
Table of Contents
