Table of Contents
Advertisement
• Authentication Port Identifies the authentication port. The authentication port is used to
• Number of Retries
•
Time
out for Reply
• Dead Time
• Key String
• Source IP Address
• Usage Type
Add to List
Use the
button when you add the RADIUS configuration to the RADIUS Table at the bottom
of the screen.
is the highest value. The RADIUS Server priority is used to configure
th
e server query order
verify the RADIUS server authentication.
The authenticated port default is 1812
Defines the number of transmitted requ
before a failure occurs. The possible field values are 1 - 10.
Three is the de
fault value.
This defines the amount of the time in seconds the device waits for an
answer from the RADIUS server before retrying the query,
switching to the next serve
The possible field values are 1 - 30.
Three is the default value.
This defines the amount of time (minutes) th
bypassed for service requests. The range is 0-2000.
The Dead Time default is 0 minutes.
This defines the default key string used fo
encr
ypting all RADIUS communications between the device and the
RADIUS server.
Th
is key must match the RADIUS encryption.
Defi
nes the source IP address that is used for communication with
RADIUS servers.
Specifies the RADIUS server authentication type. The default value is
Login. The possible field values are:
• Login, indicates that the RADIUS server is used for
authenticating user name and passwords.
• 802.1X, in
dicates that the RADIUS server is used for 802.1X
authentication.
• All, where indicates tha
authenticating user name and passwords, and 802.1X port
authentication.
ests sent to RADIUS server
r.
at a RADIUS server is
r authenticating and
t the RADIUS server is used for
or
Advertisement
Table of Contents
