Chapter 2. Hardware Interface; Physical Descriptions - Planet IPM-8221 User Manual

Chapter 2.

2.1 Physical Descriptions

Front Panel
Item
No.
1 Default Switch
2 Reset Switch
3 LCD Displays
Interface
4
Selection Button
Power Output
5
Socket
IP-based 8-port Switched Power Manager with 2 Cascaded Ports
Hardware Interface
Description
This switch is recessed and must be pushed with a thin object,
such as the end of a paper clip.
You can press this button and hold it for more than 3

seconds to reset the PDU to factory default values.
 Release this switch and restart the device to take effect.
Hold down the key to restart the PDU.
LCD is used to display PDU status information.
Used to control the menu function of LCD.
Each power socket can connect to electrical devices with the
current less than 10A.
The total output power is less than 16A. If the power output
exceeds the maximum load, the PDU and electrical devices may
be damaged and the circuit breaker protection function may be
triggered.
13
- -
IPM-8221