Lacp - Planet WGSD-1022 User Manual

4.3.3 LACP

Aggregated Links can be manually setu
Link Aggr egation Co ntrol Protocol
Aggregat e ports can be linked into
the same speed, set to full-duplex
The LACP screen contains fields f
The page contains the following fields:
• LACP System
Priority
• Port
• LACP Port Priority
• LACP Timeout
• Admin Key
p or automatically established on the relevant links by enabling
(LACP).
link-aggregation port-groups. Each group is comprised of ports with
operation.
or configuring LA CP LAG s (see figure 4-9)
Figure 4-9 LACP configuration screen
Indicates the global LACP priority value. The possible range is 1-
655 35 and the default value is 1.
Set the port number which need to timeout and the priority values are
assigned
Where set the LACP priority value for the port and the field range is
1-65535
A dministrative LACP timeout. A short or long timeout value can be
sele cted. Long is the default
A chann el will only be formed between ports having the same admin
k ey, in other words, this only applies to ports located on the same
swit ch.