Show Fiber-Ports Optical-Transceiver - Planet WGSD-1022 User Manual

Command Mode
Privileged EXEC mode
User Guidelines
This feature works only on 1-Gbps ports.
Example
The following example displays the estimated copper cable length attached to all ports.
Console# show copper-ports cable-length
Port Length [meters]
------ ---------------------
e1 < 50
e2 Giga link not active
e3 110-140
e4 Fiber

5.14.4 show fiber-ports optical-transceiver

The show fiber-ports optical-transceiver privileged EXEC command displays the optical transceiver
diagnostics.
Syntax
show fiber-ports optical-transceiver [interface] [detailed]
interface — A valid Ethernet port.
Detailed — Detailed diagnostics.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
To test optical transceivers ensure a fiber link is present.
Examples
The following example displays the optical transceiver diagnostics.