Queue Setting - Planet WGSD-1022 User Manual

CoS Default:
The Table contain s the following fi
• Interface
•
Defaul t CoS
• Restore Defaults
• LAG
4

.8.2 Queue Setting

T he Queue Setting screen (see figure 4-36) contains fields for defining the QoS queue forwarding types.
The page contains the following fields:
• Strict Priority
• WRR
• Queue
elds:
Interface to which the CoS configuration applies
Determines the default CoS value for incoming packets for which
VLAN tag is not defined. The possible field values are 0-
The default CoS is 0
Restores the device factory defaults for mapping CoS values to a
forwarding queue.
LAG to which the CoS configuration applies.
Figure 4-36 Quere Setting screen
This indicates that traffic scheduling for the selected queue is based
strictly on the queue priority.
This indicates that traffic scheduling for the selected queue is based
strictly on the WRR.
Shows the queue for which the queue settings are displayed.
The possible field range is 1 - 4.
a
7.