Table of Contents
Advertisement
client, and cannot provide time services to other systems.
4.3 Port Configuration
In this field, you can see these parts, such as port settings, Link aggregation, LACP.
4.3.1 Port settings
To use the port settings screen for setting up each of the switch's ports.
It shows these parts: port, description, admin status, link status, speed, duplex,
MDI/MDIX, Flow control, type, LAG, PVE (see Figure 4-6):
The Port
Settings screen cont
• Port
• Description
• Admin
Status
• Link Sta
tus
Figure 4-6 Port Settings screen
ains
the following fields:
Shows the port number. You can click on the Detail button of the
appropriate port (G1, G2) to use an SFP
button shows the Port Configuration Detail screen, which include port,
description, port type, admin status, current port status ......
Click up the Detail button to make a brief descriptio
When to choose the UP button, the port can be accessed norma
choose the Down button, the port will be taken offline
Shows an active connection when you choose the UP button, there is
no active connection or the port has been taken offline by an
module, and the Detail
n of the port
lly, to
Advertisement
Table of Contents
