Table of Contents
Advertisement
User Guidelines
In both the date and recurring forms of the command, the first part of the command specifies when
summer time begins, and the second part specifies when it ends. All times are relative to the local time
zone. The start time is relativ
month is chronologically after the ending month, the system assumes that you are in the southern
hemisphere.
USA rule for daylight saving time:
Start: First S
unday in April
End: Last Sunday in October
Time: 2
am local time
EU rule for daylight saving time:
Start: Last Sunda
y in March
End: Last Sunday in October
T
ime: 1.00 am (01:00) Greenwich Mean Time (GMT)
Examples
The following example sets summer time starting on the first Sunday in April at 2am and finishing on the
last Sunday in October at 2 am.
Console (config)# clock summer-time recurring first sun apr 2:00 last sun oct 2:00
5.5.5 sntp authentication-key
The sntp authentication-
Network Time Protocol (SNTP). To remove the authentication key for SNTP, use the no form of this
command.
Syntax
sntp authentication-key nu
no sntp authentication-key number
number —
Key number (Range: 1 - 4294967295)
value — Key value (Range: Up to 8 ch
D
efault Configuration
No auth
entication key is defined.
e to standard time. The end time is relative to summer time. If the starting
key global configuration command defines an authentication key for Simple
mber md5 value
aracters)
Advertisement
Table of Contents
