Table of Contents
Advertisement
methods,when using higher privilege levels.
list-name — Character string used to name the
using accesshigher privilege levels.
method1 [method2...]—Specify at least on
Keyword
Source or destination
Enable
Uses the enable password for authentication.
Line
Uses the line password for authentication
None
Uses no authentication
Radius
Uses the list of all radius servers for authentication. Uses username "$enabx$." Where
x is the priv
Tacacs
Uses the list of all TACACS+ servers for authentication. Uses username "$enabx$."
Where x is the privilege level.
Default Configuration
I
f the default list is not set, only the enable p
c
ommand aaa authentication enable default enable.
On the console
, the enable password is used if it exists. If no password is set, the process still succeeds.
This has the same effect as using the command aaa authentication enable default enable none.
Comman
d Mode
Global Configuration mode
User Guidelines
The default
and optional list names created with the aaa authentication enable command are used with
the enable authentication command.
Create a list b
y entering the aaa authentication enable list-name method command where list-name is
any character string used to name this list. The method argument identifies the list of methods that the
aut
he tication algorithm tries, in the given sequence.
n
The d
a ditional methods of authentication a
fail
s. To ensure that the authentication succeeds even if all me
final method in the command line.
All aaa authentication enable default request
username
"$enabx$.", where x is the requested privilege level.
e from the following table:
ilege level
assword is checked. This has the same effect as the
re used only if the previous method returns an error, not if it
s sent by the router to a RADIUS server include the
list of authentication methods activated, when
thods return an error, specify none as the
Advertisement
Table of Contents
