Console Management; Connecting To The Console Port; Pin Assignment; Login In The Console Interface - Planet ISW-1022M User Manual

4.1 Connecting to the Console Port

The supplied cable which one end is RS-232 connector and the other end is RJ-45 connector. Attach the end of RS-232
connector to PC or terminal and the other end of RJ-45 connector to the console port of the switch. The connected
terminal or PC must support the terminal emulation program.

4.2 Pin Assignment

DB9 Pin Define for RJ-45 Connector

4.3 Login in the Console Interface

To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to RJ-45 type serial
(console) port of the Managed Industrial Switch. The console port of the Managed Industrial Switch is DCE already, so
that you can connect the console port directly through PC without the need of Null Modem.

4. Console Management

DB9-PIN
1
2
3
4
5
6
7
8
9
28
User's Manual of ISW-1022M
RJ-45 Connector
1 Orange/White
2 Orange
3 Green/White
4 Blue
5 Blue/White
6 Green
7 Brown/White
8 Brown