Table of Contents
Advertisement
Syntax
radius-server retransmit retries
no radius-server retransmit
Default Configuration
The default is 3 attempts.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the number of times the software searches the list of RADIUS server
hosts to 5 attempts.
Console (config)# radius-server retransmit 5
5.18.4 radius-server source-ip
The radius-server source-ip global configuration command specifies the source IP address used for
communication with RADIUS servers. To return to the default, use the no form of this command.
Syntax
radius-server source-ip source
no radius-server-ip
source — Specifies the source IP address.
Default Configuration
The default IP address is the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
To define an out-of-band IP address, use the out-of-band IP address format —oob/ip-address.
Example
The following example configures the source IP address used for communication with RADIUS servers to
Advertisement
Table of Contents
