5.9.3 ip igmp snooping mrouter
The ip igmp snooping mrouter interface configuration command enables automatic learning of
multicast router ports in the context of a specific VLAN. To remove automatic learning of multicast router
ports, use the no form of this command.
Syntax
ip igmp snooping mrouter learn-pim-dvmrp
no ip igmp snooping mrouter learn-pim-dvmrp
Default Configuration
Automatic learning of mrouter ports is enabled.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Multicast router ports can be configured statically by the bridge multicast forward-all command.
Example
The following example enables automatic learning of multicast router ports on VLANs.
Console (config) # interface vlan 2
Console (config-if)# ip igmp snooping mrouter learn-pim-dvmrp
5.9.4 ip igmp snooping host-time-out
The ip igmp snooping host-time-out interface configuration command configures the host-time-out. If
an IGMP report for a multicast group was not received for a host-time-out period, from a specific port, this
port is deleted from the member list of that multicast group. To reset to default host-time-out use the no
form of this command.
Syntax
ip igmp snooping host-time-out time-out
no ip igmp snooping host-time-out
Default Configuration
The default host-time-out is 260 seconds.
Command Mode
Interface Configuration (VLAN) mode