Table of Contents
Advertisement
4.8.6 Advanced Mod
e
Advance
d QoS mode (see figure 4-40) provides rules for specifying flow classification and assigning
rule
actions that relate to bandwidth m
anagement. The rules are based on
the Access Control Lists (see
Access Control Tab)
Figure 4-40 Advance Mode screen
M
AC ACLs and IP ACLs can be grouped together in more complex structures, called policies. Policies
c
an be applied to an interface. Policy ACLs are applied in the sequence they appear within the policy.
Only a single policy can be attached to a port.
In advanced QoS mode, ACLs can be applied directly to an interface in the Security -ACL Binding.
However, a policy and ACL cannot be simultaneously applied to an interface.
After assigning packets to a specific queue, services such as configuring output queues for the
scheduling scheme, or configuring output shaping for burst size, CIR, or CBS per interface or per queue,
can be applied.
Out of Profile DSCP Assignments, this button opens up the DSCP Map screen. (see figure 4-41):
Advertisement
Table of Contents
