Table of Contents
Advertisement
The Managed Switch is equipped with a RS-232 DB9 connector as default. And support telnet management.
5.1 Login in the Console Interface
To configure the system via console mode, connect a serial cable to a COM port on a PC or notebook computer and to
RJ-45 type serial (console) port of the Managed Switch. The console port of the Managed Switch is DCE already, so that
you can connect the console port directly through PC without the need of Null Modem.
Please refer to
chapter 3.5- Administration Console
interface of Managed Switch with HyperTerminal on Microsoft Windows platform.
Once the terminal has connected to the device, power on the Managed Switch, the terminal will display that it is running
testing procedures.
Then, the following message asks the login password. The factory default password as following and the login screen in
Figure 5-1
appears.
Username: admin
Password: admin
5. CONSOLE MANAGEMENT
to get more information about how to connect to the console
Figure 5-1: Managed Switch Console Login Screenshot
User's Manual of WGSW-2620HP
141
Advertisement
Table of Contents
