Show System - Planet WGSD-1022 User Manual

Syntax
show sessions
This command has no arguments or keywords.
Default Configuration
There is no default configuration for this command.
Command Mode
EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following table describes the significant fields shown in the display:
Console> show sessions
Connection Host
---------------- -------------
1 Remote router
2 172.16.1.2
Field Description
Connection Connection number
Host Remote host to which the device is connected through a Telnet session.
Address IP address of the remote host.
Port Telnet TCP port number
Byte Number of unread bytes for the user to see on the connection.

5.23.9 show system

The show system user EXEC command displays system information.
Syntax
show system
Default Configuration
This command has no default configuration.
Address
-------------
172.16.1.1
172.16.1.2
Port
-------- -------
23 89
23 8
Byte