Table of Contents
Advertisement
T
here are five items, as below:
• Server
• UDP Port (1-65535)
• Fa
cility
• Description
• Minimum Se
If you want to add the Server Log configuration to the Server Log Table, use the Add to List button at the
bottom of the screen.
When a severity lev
Note
:
selected
Figure 4-80 Server Logs screen
Specifies the server to whic
Defines the UDP port to which the server logs are sent. The possible
range is 1 to 65535.
The default value is 514.
Defines a user-defined application from which system logs are sent to
the remote server. Only one facility can be assigned to a single
server. If a second facility level is assigned, the first facility is
overrid
den. All applications defined for a device utilize the same
facil
ity on a server. The possible field values are Local 0 - Local 7.
The field de
fault is Local 7.
Where provides a user-defined server description.
Indicates the Minimum severity from which logs are sent to the server.
verity
For example, if Notice is selected, all logs from a Notice severity and
higher are sent to the remote server.
el is selected, all severity level choices above the selection are
automatically.
h logs can be sent.
Advertisement
Table of Contents
