Table of Contents
Advertisement
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example assigns an administrative LACP timeout for port e8 to a long timeout value.
Console (config)# interface ethernet e8
Console (config-if)# lacp timeout long
5.11.4 show lacp ethernet
The show lacp ethernet privilege EXEC command displays LACP information for Ethernet ports.
Syntax
show lacp ethernet interface [parameters | statistics | protocol-state]
Interface — Ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to display LACP statistics information.
Console# show lacp ethernet e1 statistics
Port e1 LACP Statistics:
LACP PDUs sent:2
LACP PDUs received:2
Advertisement
Table of Contents
