Table of Contents
Advertisement
The total number of packets received longer than 1518 octets (excluding framing
Jabbers
bits, but including FCS octets), and either a bad Frame Check Sequence (FCS)
with an
integral number of octets (FCS Error) or a bad FCS with a non-integral number of
octets (Alignment Error).
The best estimate of the total number of collisions on this Ethernet segment.
Collisions
The total number of packets (including bad packets) received that are 64 octets in
64 Octets
length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that are between 65
65 to 127 Octets
and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that are between
128 to 255 Octets
128 and 255 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that are between
256 to 511 Octets
256 and 511 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that are between
512 to 1023
512 and1023 octets in length inclusive (excluding framing bits but including FCS
Octets
octets).
The total number of packets (including bad packets) received that are between
1024 to 1518
1024 and 1518 octets in length inclusive (excluding framing bits but including FCS
Octets
octets).
5.19.2 rmon collection history
The rmon collection history interface configuration command enables a Remote Monitoring (RMON)
MIB history statistics group on an interface. To remove a specified RMON history statistics group, use the
no form of this command.
Syntax
rmon collection history index [owner ownername] [buckets bucket-number] [interval seconds]
no rmon collection history index
Index — The requested statistics index group. (Range: 1 - 65535)
owner ownername — Records the RMON statistics group owner name. If unspecified, the name
is an empty string.
buckets bucket-number — A value associated with the number of buckets specified for the
RMON collection history group of statistics. If unspecified, defaults to 50. (Range: 1 - 65535)
Advertisement
Table of Contents
