Table of Contents
Advertisement
The page contains the following fi
• VLAN
• Access
• Trunk
• General
• Tagged
• Untagged
• Forbidden
• Exclude
4.4.4
VLAN to Port
The VLAN to Ports screen (see figure 4-13) contains fields for configuring VLANs to a port. This screen
displays these parts, such as:
elds:
Where means the VLAN number
Indicates the port belongs to a single untagged VLAN. When a port is
in
Access mode, the packet types which are accepted on the port
cannot be designated. Ingress filtering cannot be enabled/disabled on
an access port.
Which indicates the port bel
tagged, except for one port that can be untagged
Which indicates the port belongs to VLANs, and each VLAN is
user-defined as tagge
Defines the interface as a tagged member of a VLAN. All packets
forwarded by the interface are tagged.
information
Pack
ets forwarded by the interface are untagged
Forbidden ports are not included in the VLAN
Excludes the interface from the VLAN. However, the interface can b
added to the VLAN through GV
s
Figure 4-13 VLA N to Ports
ongs to VLANs in which all ports are
d or untagged (full 802.1Q mode)
The packets contain VLAN
RP
e
Advertisement
Table of Contents
