Table of Contents
Advertisement
Example
The following example enters the VLAN database mode.
Console (config)# vlan database
Console (config-vlan)#
5.27.2 vlan
Use the vlan interface configuration (VLAN) command to create a VLAN. To delete a VLAN, use the no
form of this command.
Syntax
vlan {vlan-range}
no vlan {vlan-range}
vlan-range — A list of valid VLAN IDs to be added. List separate, non-consecutive VLAN IDs
separated by commas (without spaces); use a hyphen to designate a range of IDs. (Range: 2 -
4063)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database mode
User Guidelines
There are no user guidelines for this command.
Example
The following example VLAN number 1972 is created.
Console (config)# vlan database
Console (config-vlan)# vlan 1972
Advertisement
Table of Contents
