Table of Contents
Advertisement
The Pag
e contains t
he following fi
Configure Multicast
• Enable Bridge
Multicast F
iltering
• VLAN ID
• Bridge Multicast
Address
• Interface
• LAG
The fields are the same for both areas.
Use the Add to List button when you want to assigns ports to a specific Multicast service address group.
Figure 4-56 Bridge Multicast screen
elds:
The check box allows to enable Bridge Multicast Filtering function.
This identifies a VLAN to be configured to a Multicast service.
Identifies the Multicast group MAC address/IP address.
Displays Interface that can be added to a Multicast service.
The configuration options are as follows:
• Static, indicates the port is user-defined.
• Dynamic, indicates the port is configured dynamically.
• Forbidden, forbidden ports are not included the Multicast group,
even if IGMP snooping designated the port to join a Multicast
group.
• None, displays the port is not configured for Multicast service.
Displays LAG that can be added to a Multicast service.
Advertisement
Table of Contents
