Bridge Multicast Forward-Unregistered - Planet WGSD-1022 User Manual

interface-list — Separate non consecutive valid Ethernet ports with a comma and no spaces;
hyphen is used to designate a range of ports.
port-channel-number-list — Separate non consecutive valid port-channels with a comma and no
spaces; a hyphen is used to designa
Default Configuration
No forbidden addresses are define
Command Modes
Inte rface Configuration (VLAN) mode
User Guidelines
Before definin g forbidden ports, the multicast group should be registered.
Examples
In this example the MAC ad
console (config)# interface vlan 8
console (config-if)# bridge multicast address 0100.5e02.0203
console (config-if)# bridge multicast forbidden address 0100.5e02.0203 add ethernet e9

3.4.5 bridge multicast forward-unregistered

T he bridge multicast fo
u nregistered multicast addresses. Use the no form of this command to return to default.
Syntax
bridge multicast forward-unregistered {add
port-channelnumber-list }
no bridge multicast forward-unregistered
add — F orce forwarding of unregistered multicast packets.
remove — Don't force for
interface-list — Sep
hyphen to designate a range of ports. (Range: Valid Ethern
port-channel-number-list — Separate nonconsecutive port-channels with a comma and no spaces;
use a hyphen to designate a ra
Default Configuration
Forward
te a range of port-channels.
d.
dress 0100.5e02.0203 is forbidden on port g9 within VLAN 8.
rward-unreg istered interface configuration command enables forwarding
| remove} {ethernet interface-list | port-channel
warding of unregistered multicast packets.
arate nonconsecutive Ethernet ports with a comma and no spaces; use a
nge of port-channels. (Range: Valid Port-channel number)
et port)