5.15.2 interface range port-channel
The interface range port-channel global configuration command enters the interface configuration
mode to configure multiple port-channels.
Syntax
interface range port-channel {port-channel-range | all}
port-channel-range — List of port-channels to configure. Separate non-consecutive port-channels
with a comma and no spaces. A hyphen designates a range of port-channels.
all — All the channel-ports.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on each interface in the range.
If the command returns an error on one of the interfaces, it stops the execution of the command on
subsequent interfaces.
Example
The following example shows how port-channels 1, 2 and 8 are grouped to receive the same command.
Console (config)# interface range port-channel 1-2
Console (config-if)#
5.15.3 channel-group
The channel-group interface configuration command associates a port with a port-channel. To remove a
port from a port channel, use the no form of this command.
Syntax
channel-group port-channel-number mode {on | auto}
no channel-group
port-channel_number — Specifies the number of the valid port-channel for the current port to join.
on — Forces the port to join a channel.