Sntp Broadcast Client Enable - Planet WGSD-1022 User Manual

Command Mode
Global configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the polling time for the Simple Network Time Protocol (SNTP) client to 120
s econds.
Console(config)# sntp client poll timer 120

5.5.9 sntp broadcast client enable

The sntp broadcast client enable global configuration command enables the Simple Network Time
Protocol
(SNTP) broadcast clients. To disable the SNTP broadcast clients, use the no form of this command.
Syntax
sntp broadcast client enable
no sntp broadcast client enble
This command has no arguments or k
Default Configuration
Disabled
Command Mode
Global configuration mode
User Guidelines
The sntp broad cast client enable interface configuration command enables the device to receive
broadcast transmissions
Use the sntp client enable interface configuration command to enable sntp client on specific interface.
Examples
The following exampl e enables the SNT
Console (config)#sntp broadcast client enable
eywords.
globally and on ALL interfaces.
P broadcast clients.