Planet WGSD-1022 User Manual page 113

Multicast Table
Example:
Adding Bridge Multicast Addresses
1. Click the check box to enable the Bridge Multicast Filtering.
2. Define the VLAN ID and New Bridge Multicast Address fields.
3. Check a port to Static to join the port to the selected Multicast group.
4. Click "Add to List" button.
5. Click the "Save Config" to apply the sttings.
T e bridge Multicast address is assigned to the Multicast group, and the device is updated. h
Defining Ports to Receive Multicast Service
1. Define the VLAN ID and the
2. Check and click a port to Static to join the port to the selected Multicast group.
3. Click "Add to List" button.
4. Click the "Save Confi
5. Select the VLAN ID to c
The port is assigned to the Multicast g
Assigning LAGs to Receive
1. Define the VLAN ID and
2. Check and click the LAG to
3. Click "Add to
4. Click the "Save Config" to apply the sttings.
The LAG is assign ed to the
Figure 4-57 Bridge Multicast screen
Bridge Multicast Address fields.
g" to apply the sttings.
heck if the entries be added.
roup, and the device is updated.
Multicast Service
the Bridge Multicast Address fields.
Static to join the port to the selected Multicast group.
List" butt on.
Multic ast group, and the device is updated.