Table of Contents
Advertisement
5.5.4 clock summer-time
The clock summer-time global configuration command configures the system to automatically switch to
summer time (daylight saving time),. To co
time, use the no form of this command.
Syntax
clock summe
r-time recurring {usa | eu | {week day month hh:mm week day month hh:mm}} [offset
offset] [zone acronym ]
clo
ck summer-time date date month y
acronym ]
clock summer-time date month date
acronym ]
no clock summer-time
recurring — Indicate
days every year.
date — Indicates tha
and end on the second specific date in the
usa — T
he summer time rules are the United States rules.
eu — The summer time rules are the European Union ru
week — Week of the month. (Range: 1 - 4, first, last)
day — Day of the week (Range: first three letters by name, like sun)
date — Date of the month (Range:1 - 31)
month — Month (Range: first three letters by name)
year — year - no abbreviation (Range: 2000 - 2097)
hh:mm — Time in military format, in hours and
offset offset — Number of minutes to add during summer time (Range: 1 - 1440).
zone acronym — The acronym of the
unspecified default to the timezone acronym. (Range: Up to 4 characters)
Default Configuration
Su
mmer time is disabled.
offset
offset—default is 60
zon a
e cronym— If unspecified
Command Mode
Global Configuration mode
nfigure the software to not automatically switch to summer
ear hh:mm date month year hh:mm [offset offset] [zone
year hh:mm month date year hh:mm [offset offset] [zone
s that summer time should start and end on the corresponding specified
t summer time should start on the first specific date listed in the command
command.
time zone to be displayed when summer time is in effect. If
default to the timezone acronym
les.
minutes (Range:hh: 0 - 23, mm:0 - 59)
Advertisement
Table of Contents
