8-Port 10/100Mbps + 1-Port Gigabit TP/SFP Combo
Managed Switch
Cost-effective Desktop Size / Fiber Capability / Group Managed
Switch
The PLANET WGSD-910 is a Desktop size L2 Managed Fast Ethernet
Switch. It provides 8 10/100Mbps Fast Ethernet ports and 1 Gigabit TP/SFP
interface. The Compact-size design not only makes the Desktop Switch
fit into space-limited environment but also is mountable in a 19-inch rack
with attached rack-mounting kits. The equipped Gigabit SFP slot makes
it with capability of fiber link for distance extending and can handle
extremely large amounts of data in a secured topology which is linked to a
backbone or high capacity servers.
The various support of QoS mode and VLAN features make the WGSD-910
meet the needs of effective data traffic control for SOHOs, SMBs and
Enterprises, such as VoIP, video streaming and multicast applications. The
key features are shown as below:
• IP Stacking up to 8 units
• Rapid Spanning Tree
• IGMP Snooping
Enhanced Layer 2 Features
The WGSD-910 can be programmed for basic switch management
functions, such as per port speed configuration, Port Trunking, VLAN,
Rapid Spanning Tree, QoS, bandwidth control and IGMP Snooping. The
WGSD-910 provides Port-based VLAN, 802.1Q Tagged VLAN. And the
VLAN groups allowed on the WGSD-910 will be maximally up to 255. Via
supporting port trunking, the WGSD-910 offers the operation of a high-
speed trunk combining multiple ports. It also provides four groups of up to
8 ports for trunking and supports fail-over as well.
Efficient Management – Stacking Management
For efficient management, the WGSD-910 is equipped with console
interface, Web interface and SNMP agent. With its built-in Web-based
management, the PLANET WGSD-910 offers an easy-to-use, platform-
independent management and configuration facility. It supports standard
Simple Network Management Protocol (SNMP) and can be managed via
any standard-based management software. For text-based management,
the WGSD-910 can also be accessed via Telnet and the console port.
One of the management features of WGSD-910 is the IP Stacking function
support. It helps network managers to easily configure up to 8 switches in
the same series via one single IP address instead of connecting and setting
each unit one by one.
Data Sheet
• 802.1Q VLAN
• SNMP / SNMP Trap
• SFP slots, Fiber link capability
Key Features
PhySiCaL Port
•
8-Port 10/100Base-TX RJ-45
1-Port GiGabit tP/SFP CoMbo intErFaCE LayEr 2
FEaturES
•
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE
802.3z Gigabit Ethernet standard
•
Auto-negotiation and half duplex/full duplex modes for all
10Base-T/100Base-TX and 1000Base-T ports.
•
High performance of Store–and-Forward architecture, broadcast
storm control and runt/CRC filtering eliminate erroneous packets
to optimize the network bandwidth
•
IEEE 802.1Q Tagged based VLAN and Port-based VLAN
•
Up to 4 Trunk groups, each trunk can be up to maximum 8 port
with 1.6Gbps bandwidth(Duplex Mode)
•
IEEE 802.1d, IEEE 802.1w, classic Spanning Tree Algorithm or
Rapid Spanning Tree support
QuaLity oF SErviCE
•
4 priority queues on all switch ports.
•
Strict priority and Weighted Round Robin (WRR) CoS policies
•
QoS and bandwidth control on each port
MuLtiCaSt
•
IGMP Snooping v1 and v2
•
IGMP Port and Group policy
SECurity
•
IEEE 802.1x Port-Based Authentication, RADIUS server
authentication or Local account authentication
•
MAC address Filtering and MAC address Binding
•
Port Mirroring to monitor the incoming or outgoing traffic on a
particular port
ManaGEMEnt
•
WEB-based, Telnet, Console Command Line management
•
Access through SNMP v1 and v2c set and get requests.
•
Four groups (history, statistics, alarms, and events) of embedded
remote monitoring (RMON) agents for network monitoring and
traffic analysis
•
EMI standards comply with FCC, CE class
WGSD-910