Default Configuration
N
o external clock so
urce
C
ommand Mod
P
rivileged EXEC mode
User Guidelines
There are no user guidelines for this command.
E
xamples
T
he following
example configures an external time source for the system clock.
console# clock source sntp
5.5.3 clock timezone
The clock timezone global configuration command sets the time zone for display purposes. To set the
time to Coord
inated Universal Time (UTC), use the no form of this command.
S
yntax
clo
ck timezone hours-offset [minutes minutes-offset] [zone acronym ]
no clock timezone
hours-offse t— Hours difference from UTC. (Range: -12 – +13)
minutes minutes-offse t— Minutes difference from UTC. (Range: 0 – 59
zone acronym —The acronym of the time zone. (Range: Up to 4 characters)
Default Configuration
UTC
Command Mode
Global Configuration mode
User Guidelines
The system internally keeps time in UTC, so this command is used only for display purposes and when
the time is manually set.
Examples
The following example sets the timezone to 6 hours difference from UTC.
console# (config)# clock timezone -6 zone CST
e