Table of Contents
Advertisement
• Recipient IP
• Notification Type
• SNMP v1.2
• SNMP V3
• Security Le
vel
• UDP Port
• Filter Name
• Timeout
• Retries
Use the
relevant table at the bottom of the screen.
Which indicates the IP address to whom the traps are sent.
Defines the notification sent. The possible field values are:
Traps, indicates traps are sent.
Informs, indicates informs are sent.
Enables SNMP v1.2 as the Notification Recipient. Either SNMP v1.2
or SNMPv3 can be enabled at any one time, but not both at the same
time. If String and Notification Version fields are enabled for
configuration:
• Community String, where identifies the community string of the
trap manager.
• Notification Version, determines the trap type. The possible
field values are:
SNMP V1, which indicates SNMP Version 1 traps are sent.
SNMP V2, which indicates SNMP Version 2 traps are sent.
T
his enables SNMPv3 as the Notific
or SNMP V3, enabled at any one time, but not both at the same time.
If SNMP V3, which is enabled, the User Name and Security Level
fields are enabled for configuration:
• Us
er Name - defines the user to whom SNMP notifications are
sent.
Defines the means by which the packe
field values are:
• No Authentication. Indicates the packet is neither authenticated
nor encrypted.
• Authentication, which
• Privacy, which indi
encrypted.
Displays the UDP port used to send notifications.
The default is 162.
Indicates if the
SNMP filter for which the SNMP Notification filter is
defined.
Indicates the amount of time (seconds) the device waits before
resending informs.
The de
fault is 15 seconds.
In
dicates the amount of times the d
The default is 3 seconds
button when you want to add the Notification Recipient configuration to the
ation Recipient. Either SNMPv1.2
t is authenticated. The possible
indicates the packet is authenticated.
cates the packet is both authenticated and
evice resends an inform request.
Advertisement
Table of Contents
