Static Address - Planet WGSD-1022 User Manual

• Authentication Type Defines the user authentication methods. Also you can choose
• User Name
• Password
• Confirm Password
Use the
T able.
4

.12.2 Static Address

A static address can be assigned to a specific interface on this switch. Static addresses are bound to the
assigned interface and cannot be moved. When a static address is seen on another interface, the
address will be ignored and will not be written to the address
combinations of all the authentication methods. The possible field
values are:
• Local, authenticates the user at the device level. The device
checks the user name and password for authentication.
• RADIUS, where authenticates the user at the RADIUS serv
• TACACS+, which authenticates the user at the TACACS+ serv
• None, assigns none authen
profile.
Displays the user name.
Specifies the new password. The password is not displayed. As it
entered an "*" corresponding to each character is displayed in the
field. (Range: 1-159 characters)
This confirms the new password. The password entered into this fi
must be exactly the same
as the password entered in the Password field.
button when you want to add the user configuration to the Local User's
Figure 4-69 Static Address screen
tication method to the authentication
table (see figure 4-69)
er.
er.
eld