Table of Contents
Advertisement
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the VLAN 1 IP address of 131.108.1.27 and subnet mask
255.255.255.0.
Console (config)# interface vlan 1
Console (config-if)# ip address 131.108.1.27 255.255.255.0
5.27.5 interface range vlan
The interface range vlan global configuration command enters the interface configuration mode to
configure multiple VLANs.
Syntax
interface range vlan {vlan-range | all}
vlan-range — A list of valid VLAN IDs to add. Separate non consecutive VLAN IDs with a comma
and no spaces; a hyphen designates a range of IDs.
all — All existing static VLANs.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on each interface in the range.
If the command returns an error on one of the interfaces, an error message is displayed and execution
continues on other interfaces.
Example
The following example groups VLAN 221 until 228 and VLAN 889 to receive the same command.
Console (config)# interface range vlan 221-228,889
Console (config-if)#
Advertisement
Table of Contents
